If you are a regular on GLC you will probably agree that most of the content on this blog deals with the actual guitar whether it be the instrument or ways to improve how it sounds when you play.

Admittedly, we probably do not spend enough time dealing with something that is NOT on the actual guitar but is very important to electric guitarists. As a result, today we’ll spend time examining the electric guitar amp, examining what all those little knobs do, if for example, you just bought a new guitar package this past week.

Electric Guitar Amp Settings 101

First off, let’s start with the definition of a guitar amp and what it actually does. The guitar amplifier (or ‘amp’ for short) is an electronic amplifier designed to make the signal of an electric or acoustic guitar louder so that it will produce sound through a loudspeaker. Beyond its basic mean of producing “louder” sounds amps can also modify an instrument’s tone by emphasizing or de-emphasizing certain frequencies and/or adding electronic effects.

Now that we have all the “big terms” out of the picture, the reason guitarists utilize amps is because the range of tone available is just so much greater. The guitar amp completely revolutionized rock ‘n roll because it brought a whole new spectrum to sound that musicians never thought possible.

When you first brought home your guitar amp you probably noticed that various knobs like “Treble”, “Middle”, “Bass” and “EQ” are situated on the front. You may have a basic understanding of what these settings do but if not, let’s define each term:

Treble – soprano; having or denoting a high range. Adjusting this setting will determine the amount of high end in your sound. Lots of treble equals a very sharp and crisp sound.

Middle — between the soprano and the bass, your middle control will impact the overall character of your sound. You could say that this is the most important setting. Little middle and you get that classic rock ‘n roll sound while higher mids equal a more blues like quality.

Bass — the low range is beloved by a lot of musicians and fans alike because it has that infamous deep, thundering quality. Most guitarists unanimously love a lot of bass but of course it always depends on personal opinion.
NOTE: You may not get the full effect of the bass with smaller amps simply because they are just not equipped to handle the load.

EQ/Tone —  this is your “overall” control. While Treble, Middle and Bass will ONLY adjust that particular range the EQ/Tone manages all your basic settings with one easy knob.

Additional Guitar Amp Settings

Every dependable amp should include the above settings but a lot of amps will also feature controls for distortion, chorus, reverb, etc, etc. If you have a solid understanding of Treble and Bass then distortion and reverb are just an added bonus. These types of controls are solely for guitar effects, allowing you to squeeze that sound exactly like how you intended.

Feel free to play around with those settings but always master the basic guitar amp fundamentals before getting too far ahead. As is the case with anything, cheaper amps will probably have less settings and not sound as good (especially when played loud).

If you bought a guitar package (guitar, amp, strap, picks, etc) you likely ended up with a practice amp. These small amps are great, like the name implies, for practice but do not sound exceptionally well when the volume is above a normal level. It’s a great starter tool but overtime most guitarists will eventually upgrade.

Experiment with your Guitar Amp

Have you ever watched an elderly individual attempt to use a computer for the first or second time? If so, you will probably observe that they are very timid and constantly afraid that one wrong click will “break” the entire computer. Of course, anyone who has used a computer knows this is silly but basically it comes down to that age group not being very familiar with the product and thus scared to use it.

The same could be said about guitar amps. At first, you may not want to mess with the amp settings too much because it could do harm to the machine or others might wonder what in the hell you are doing. In reality, nothing could be further from the truth. The only way you will really know what your amp is capable of doing is by experimenting with its settings. Play with the controls and have fun!

As a general rule of thumb, always starts with ALL dials pointed at 12 o’clock and work from there. Take notes if you find such a practice useful. Over time, you will learn which settings you like best and for what situation. Then, it really becomes fun because you do not have to do as much thinking and rather focus on the creativity of producing new music.